Whistler GPS User Manual download pdf (Page 12)

Battery Installation

This unit requires 2 AAbatteries (not included).

1. Remove the battery compartment cover by using your

thumb to grab the release tab. See 10-A.

2. Remove the insert that is in the battery compartment

and discard.

3. Insert the optional Compact Flash memory card into

slot. Note: The unit will operate without this card.

See page 11 for Compact Flash card information.

4. Observing correct polarity (+) and (-), insert batteries

as shown.

5. Reinstall battery compartment cover.

For best performance from alkaline batteries we

recommend using the highest capacity type available

as recommended for digital cameras and portable

CD players.

Note: Make sure that alkaline batteries are removed from

the unit when using the optional cigarette lighter adapter

cord. If the batteries are not removed, damage to the

batteries and/or the unit will result.

If using rechargeable AAbatteries, for longer life select the

highest capacity available. Ni-MH rechargeable batteries

are recommended. Common rechargeable batteries have a

power rating of 1700mA or higher.

Note: DO NOT mix battery types as this can damage the

batteries. Lithium batteries are recommended for use in

cold temperatures.

Remove the batteries when the Galileo

™

will not be used

for an extended period of time. Damage caused by leaky

or improperly charged batteries (For example; Alkaline

batteries in unit while using the optional power cord) is

not covered under warranty. Check with the battery

manufacturer about their specific product warranty and

disposal recommendations.

Battery

Installation

GALILEO

™

GPS

Battery Installation

10-A

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

No comments

Whistler GPS User Manual Page 12