Whistler GPS User Manual download pdf (Page 13)

Compact Flash Card

The Galileo

™

uses standard Type II Compact Flash

(CF) Memory Cards. These cards can be added to the

Galileo

™

GPS receivers through the battery compartment.

CF cards come in many configurations up to 1024 MB.

The addition of a CF card to the unit allows data to be

uploaded/download to/from the Whistler Map

™

Software CD (provided with the Galileo

™

Accessory Upgrade

Pack and Galileo Elite

™

Important: Make sure that the CF card you purchased

(other than from Whistler) has the CF and FCC logo’s

clearly visible.

Add or Remove the CF card:

1. Press and hold the power button to turn the unit off.

2. Remove the battery door.

3. Remove both of the AAbatteries.

4.To remove the CF card, gently pull the CF card

slightly towards the top of the unit. Carefully continue

to slide the CF card out of the channel it’s in. Tilt the

Galileo

™

to help remove the CF card.

5. To install the CF card, hold it such that the tiny holes

are at one end facing the bottom of the unit and the lip

is on the top. Place the CF card in the channel

provided in the battery compartment.

Note: CF card can only go in one way. Carefully push

the CF card towards the bottom of the unit until you

feel it lock into place. Do not force the CF card. Forcing

the CF card could cause damage to the card and/or

the unit.

6. Reinstall the batteries into the battery compartment.

Be sure to observe the proper polarity.

7. Replace the battery compartment door.

8. Press and hold the Power (PWR) button to turn on the

Galileo

™

Compact

Flash Card

Add or

Remove the

Compact

Flash Card

GALILEO

™

GPS

Compact Flash Card (CF)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Comments to this Manuals

No comments

Whistler GPS User Manual Page 13

Comments to this Manuals